Detailed introduction to the characteristics

15/02/2022

        1. Volvo generator in-line six-cylinder, water-cooled, exhaust gas turbocharged, four-stroke, air intake is water-to-air intercooling (twd type), or air intake is air-to-air intercooling (tad type), direct injection type fuel system.
        2. The low-inertia supercharger, in-line plunger fuel injection pump, integrated mechanical governor or GAC electronic governor, and multi-hole fuel injector are composed of a fast-response fuel injection system, so that the engine has the High load bearing capacity with short recovery time.
        3. Volvo alternator can replace the cylinder liner, with fire-stop shoulder, which can make the cylinder head resistant to high temperature. The cast iron cylinder block optimizes the distribution of force, without excess weight, and the whole machine is particularly light. Nitrogen-carbon treated crankshaft and transmission gears are suitable for heavy-duty operation, and there are 7 bearings on the crankshaft to reduce the load on the main bearing.
        Fourth, the electric heater in the intake manifold can make the engine start quickly and reliably at low temperature in winter, and can reduce exhaust emissions.
        5. The newly designed all-electric injection engine also has: higher reliability, over 30,000 hours without overhaul, reaching the professional level in the industry; lower fuel consumption, which reduces costs; complies with EU II emission standards; reduced power at high altitudes The power drop is ≤2.5 per 1000m rise; the step-by-step load performance is better, the speed drop is less and the recovery time is shorter; better low temperature cold start performance; larger smoke exhaust back pressure.

        The above are the characteristics of Volvo generators, I hope to help everyone.